ECONOVAPACK

Custom process

Custom Packaging Process: From Idea to Bulk Order

A custom packaging project usually starts with product application, size, material, printing artwork and order quantity. ECONOVAPACK helps buyers confirm packaging specifications before sampling and bulk production.

Step by step

Custom packaging process

01

Share application

Tell us the product type, food use, weight and market.

02

Confirm structure

Confirm size, structure, material and packing needs.

03

Review artwork

Share logo, AI/PDF/EPS artwork, colors, barcode and text.

04

Approve order

Review proof or sample where applicable, then confirm bulk order and shipment details.

Artwork checklist

Files and details to prepare

ItemRecommended detail
Logo fileVector file if available
ArtworkAI, PDF or EPS preferred
ColorsPantone or CMYK requirement
Product labelsBarcode, SKU, warning text or market labels if required
Carton marksShipping marks and outer carton information

Quotation detail

Details that change a custom packaging quote

Two projects with the same box size can price very differently once the full specification is opened. Board grade and thickness decide strength and print surface. Print coverage, number of colors and any special finish change plate and setup work. Structure complexity, window cut-outs and special closures add tooling steps. This is why a custom quote is built from the specification table rather than from a photo alone: send the closest product reference you have, and mark which details are fixed and which are open to suggestion.

DetailWhy it matters
Board grade and thicknessDecides rigidity, print quality and how the pack survives transport
Print coverage and colorsDecides plate count, setup and per-unit print cost
Finish and coatingMatte, gloss, grease or moisture barriers change material and process
Structure and toolingNew sizes or shapes may need a cutting die or mould, confirmed before sampling
Packing formatPieces per pack and per carton drive carton volume and freight

Proofing

Proofing and approval in practice

Artwork review checks the file before anything is printed: vector format, fonts, barcode readability, color references and the placement of legal or market text. A digital proof confirms layout and content; where color or structure is critical, a physical sample or printed proof can be arranged and any charge is quoted in advance. Approval is recorded against an artwork version, so later changes are made to a new version rather than edited silently. Nothing goes to bulk production on an unapproved proof.

Repeat orders

Repeat orders and artwork version control

For repeat programs, keep the approved specification, artwork version and packing format on file and quote against them. If a market label, barcode or design element changes, flag it in the repeat inquiry so the new version is proofed before production instead of discovered at delivery. The minimum bulk order is 10,000 pcs per SKU/specification, and quantities from different SKUs or specifications cannot be combined to meet this minimum. Sample quantities and pieces per carton are separate from the bulk MOQ. Bulk orders are normally ready for dispatch in 10–30 days, depending on quantity, printing and packing; international transport and customs clearance are additional.

Avoid delays

Where custom projects usually slow down

Most delays in custom packaging are not production problems; they are information problems. Artwork that arrives as a low-resolution image instead of a vector file has to be rebuilt. Colors given as screen values instead of Pantone or CMYK references cannot be matched reliably. A size approved from a drawing but never tested with the real product may need a new die. Each of these is cheap to fix at the checklist stage and expensive after sampling, which is why the process on this page front-loads specification and artwork review.

A complete first message covers the application, product dimensions or capacity, material preference, artwork status, quantity per SKU and destination. With those six points present, the first reply can already confirm structure options and the sampling route instead of asking for basics.

Sampling routes

Sampling routes before bulk production

Sampling follows the risk in the project. A standard item with new artwork may only need a printed proof. A new structure or size needs a physical sample handled with the real product. A full custom program may combine both: structure sample first, then printed sample on the approved structure. Which route applies is confirmed after the specification review, and any sample or setup charge is quoted before the sample is made, so the approval step never carries a surprise cost.

Send custom packaging requirements

Attach product details and artwork information for a clearer quotation discussion.

Send Custom Packaging Requirements

FAQ

Custom Packaging Process: From Idea to Bulk Order — frequently asked questions

What are the stages of a custom packaging order?

Five stages: select the base item and size; confirm material, construction and print specification; approve a proof and a physical custom sample; freeze the written specification and artwork version; then produce, inspect and dispatch against those documents. Each stage closes before the next begins, which is what keeps the bulk order identical to the approved sample.

What do I need to provide at the start of the process?

The product type and size, material preference, estimated quantity, destination, target use and your vector artwork with color references. The more complete the first brief, the fewer revision rounds follow; a complete enquiry is normally answered with a quotation in about 1–3 days.

What is the difference between a proof and a custom sample?

A proof checks the artwork itself — layout, colors and text — on screen or paper. A custom sample is the design produced on the real item, so it also checks print behaviour on the substrate, fit and finish. Custom samples may carry a sample or setup charge, quoted in advance.

When does the specification freeze, and why does it matter?

The specification freezes when the sample is approved and before production starts. From that point, production, inspection and any reorder all work against the same document — material, dimensions, print, packing and marks — so a change after the freeze is handled as a formal revision, not an informal edit.

Can I change artwork after the sample is approved?

Yes, but the change restarts the approval for the affected item: revised artwork, a new proof and normally a new printed sample, with any additional sample or setup charge quoted in advance. The new artwork version replaces the old one in the specification, and only the latest version is used in production.

How long does the full custom process take?

Custom-printed samples are planned at roughly 7–15 days, and production from the frozen specification is normally ready for dispatch in 10–30 days depending on quantity, printing and packing. International transport and customs clearance are additional, so launch dates are worked backwards from the total cycle.

WhatsApp