ECONOVAPACK

Compliance guide for buyers

PFAS-Free Food Packaging: What It Means and What to Ask Your Supplier

“PFAS-free” now appears on takeaway boxes, bowls and plates almost as often as “compostable” did a few years ago — and it is just as easy to print without proof. PFAS are a large family of synthetic chemicals that were once the standard way to make paper and molded-fiber packaging resist grease and water. Regulations in several major markets now restrict them, and buyers are expected to show evidence, not just a supplier’s word.

The short answer first

Leak Resistant Bagasse Clamshells wholesale food packaging product

A PFAS-free claim is only as strong as three things: the exact product and its grease-resistance route, the destination market whose rules apply, and a test report or supplier declaration whose scope covers that product. “PFAS-free”, “no intentionally added PFAS” and “total fluorine below 100 ppm” are three different claims with three different evidence levels, and they are not interchangeable. A molded-fiber bowl and a paper cup from the same factory can have different answers, because the grease barrier in each is made a different way.

PFAS status is a specification item, not a marketing label. Like compostability, it is confirmed per exact SKU and destination before it is stated anywhere — the same discipline ECONOVAPACK’s compostability guide applies to EN 13432 and ASTM D6400 claims, and the same per-SKU check the food-contact documents page describes for destination markets.

1. What PFAS are, and where they were used in food packaging

PFAS — per- and polyfluoroalkyl substances — are a family of thousands of synthetic chemicals built around carbon-fluorine bonds. Those bonds make them exceptionally resistant to heat, water, oil and grease, which is why they were used for decades as grease-proofing and water-repellent treatments in paper and molded-fiber food packaging: fast-food wrappers, bakery papers, microwave popcorn bags, molded-fiber clamshells, bowls and plates.

The same stability is the problem. PFAS do not break down easily in the environment or in the human body, which is why they are often called “forever chemicals”.

For a buyer, the practical consequence is simple: a grease-resistance claim and a PFAS claim are two different claims. A bagasse clamshell can hold hot, oily food for an hour without any fluorinated treatment, relying on fiber density and forming. Another can hold the same food because a fluorinated grease-proofing agent was added to the pulp or the surface. Both pass a leak test; only one can carry a PFAS-free claim. The difference is invisible on the finished item, which is why the claim must be traced to the formulation and the test report.

Regulation map

2. The rules that changed — and what they actually say

There is no single global PFAS ban for food packaging. The rules are a patchwork of national and state measures, each defining its scope differently. The table below is a framework index; the text of the rule in each destination must be rechecked before an order.

JurisdictionWhat the rule coversKey date
United States — federal (FDA)PFAS grease-proofing agents are no longer sold by manufacturers for the US food-contact market; 35 related food-contact notifications were determined no longer effective in January 2025. A market exit, not a federal legislative ban.February 2024 announcement; January 2025 notifications
California (AB 1200)Plant-fiber food packaging may not be distributed or sold if PFAS were intentionally added for a functional effect, or if total organic fluorine is 100 ppm or more.1 January 2023
MinnesotaManufacture, sale and distribution of food packaging containing intentionally added PFAS is prohibited.1 January 2024
New YorkFood packaging containing intentionally added PFAS may not be distributed or sold.31 December 2022
DenmarkPFAS are banned in paper and board food-contact materials.July 2020
European UnionNo EU-wide PFAS ban on food packaging is in force yet. A universal restriction proposal under REACH was submitted in 2023 and is under evaluation; some member states apply their own measures.Proposal under review

Two points matter most. First, most US state rules ban intentionally added PFAS, and California adds a total organic fluorine threshold of 100 ppm as a second test; a declaration that says only “no PFAS added” answers the first, not the second. Second, the FDA position is often misquoted as a US-wide ban. It is not: state law is where the enforceable restriction sits, so the buyer must know which state the goods will be sold in.

Claim levels

3. Three different claims, three different evidence levels

Suppliers use “PFAS-free” loosely. Before approving artwork, pin down which of the three claims below is being made: each one needs different evidence.

Claim as writtenWhat it meansEvidence a buyer should hold
No intentionally added PFASNo fluorinated chemical was deliberately added to the formulation for a functional or technical effect.Supplier declaration naming the grease-resistance route, plus a formulation statement for the whole item.
Total fluorine below 100 ppmA laboratory screening test found total fluorine under 100 ppm in the finished item.Test report for the exact SKU: laboratory, method, sample description, detection limit and result.
PFAS-freeCommonly read as no PFAS at all, including unintentional traces. In practice most schemes define it through the two tests above, not through zero detection of every PFAS compound.Both of the above, plus a written definition of what “PFAS-free” means for this product, so the artwork matches the evidence.

The 100 ppm figure is not arbitrary. Since 1 January 2020, the Biodegradable Products Institute (BPI) has required certified products to contain no intentionally added fluorinated chemicals and to show total fluorine below 100 ppm, with a formulation review. The EN 13432 compostability route applies a total fluorine limit of the same 100 mg/kg order. A fiber item on a fluorinated route can therefore pass disintegration and biodegradation yet fail the fluorine gate, so the two claims must be checked separately.

For distributors, the safest artwork rule is the same as for compostability: every environmental word on the pack must trace to a document in the order file for that exact item.

4. How PFAS testing works: screening versus targeted analysis

Total fluorine screening. The usual first test measures total fluorine in the finished item, typically by combustion ion chromatography. It does not identify individual PFAS compounds; it measures all fluorine present, whether from an intentionally added treatment, a processing aid, recycled fiber, or background contamination. Below 100 ppm is the common screening pass used by BPI and by California’s threshold. Above 100 ppm, the fluorine source must be investigated before any threshold claim is made.

Targeted PFAS analysis. A second test looks for specific PFAS compounds by liquid chromatography with tandem mass spectrometry. It confirms whether named substances are present above a detection limit, and it is the right tool when a buyer or regulator asks about a particular compound or list. It is slower and more expensive than screening, and a clean result for one list is not a clean result for all PFAS.

What to check on the report itself. Read the sample description first: does it name the exact SKU, including size, colour, coating and print? Then check the laboratory, the method, the date and the detection limit. A report for a raw material, a different size, an unprinted version or a different factory is not evidence for the item quoted. A supplier declaration is a formulation statement, not a substitute for a laboratory report where the destination rule sets a numerical threshold.

5. Where PFAS can still show up without being added on purpose

Even a formulation with no fluorinated treatment can return a detectable fluorine result. Recycled fiber can carry residues from earlier fluorinated papers; process water, mold-release agents, adhesives, tapes, labels and inks can introduce fluorine; and a line that previously ran a fluorinated product can leave traces until cleaned and verified. Test what the buyer will actually receive — the finished, printed item from the production line that will make the order — not a clean laboratory sample of unprinted pulp. If the coating, ink, adhesive, recycled-fiber share or factory changes, the check reopens with it.

Alternatives

6. PFAS-free alternatives and their trade-offs

Removing fluorinated grease-proofing does not remove the need for grease resistance. Each route trades one property against another; the right choice depends on the food, the holding time and the end-of-life route.

RouteHow it resists greaseTrade-offs to test
Uncoated molded fiber, high forming densityDense fiber structure slows grease penetration without any coating.Shorter grease hold time with hot, oily food; weaker with thin walls.
Water-based dispersion coatingAcrylic or bio-based barrier layer applied to the surface.Hold time varies by coating weight; check repulpability and compostability compatibility.
In-pulp barrier additiveBarrier chemistry added inside the pulp before forming.Effect depends on dosage and fiber source; confirm by finished-item test.
Lamination (for example PLA film)Continuous film layer blocks grease and moisture.Changes the end-of-life route; not the same as uncoated for composting or recycling claims.
Wax emulsion barrierWax layer resists moisture and some grease.Heat sensitivity and compostability impact vary by formulation.

None of these routes should be chosen by name alone. Judge each on measured results for the intended use: grease hold time with the actual food at serving temperature, Kit test rating where the specification uses it, Cobb value for water absorption, and the finished-item fluorine result. ECONOVAPACK’s material comparison guide applies the same finished-item discipline to bagasse, plastic and PE-lined paper: the route name is a starting point, the test result is the decision.

7. Eight questions to ask your supplier

1. What is the grease-resistance route for this exact SKU? Ask for the route by name — uncoated, water-based coating, in-pulp additive, lamination, wax — and whether it differs between sizes or printed and unprinted versions.

2. Was any fluorinated chemical used anywhere in the product? Cover the pulp, coating, adhesives, inks, labels and any lid or sleeve, not just the main material.

3. Is there a total fluorine test report for this exact SKU? Ask for the laboratory, the method, the sample description and the result.

4. What is the detection limit, and which compounds were tested? Screening and targeted analysis answer different questions.

5. Does the item contain recycled fiber? Recycled content is the most common source of unintentional fluorine.

6. Which destination rules was this item checked against? A California-compliant item and a Denmark-compliant item are checked against different texts.

7. Does the PFAS position change the compostability position? A fluorinated route can fail the fluorine gate of a compostability scheme even when disintegration passes. Ask for both positions separately, in writing.

8. What changes would reopen the check? A new coating, ink, adhesive, fiber source or factory should trigger a new declaration and, where a threshold applies, a new test.

8. What to put in the RFQ and the order file

Send the supplier a short, written request rather than accepting a claim by email. Include the exact SKU and construction, the destination, the claim wording planned for the pack, and the documents required: the formulation statement and grease-resistance route, the total fluorine report for the exact SKU, the targeted analysis if the destination or retailer requires it, and the compostability position stated separately where a compostable claim is also planned.

Keep the reviewed pack with the approved sample and the signed specification. If a later order changes the formulation, treatment, coating, colour, print system, fiber source or factory, reopen the PFAS check before production rather than carrying the earlier approval forward; the same applies when the item is sold into a new market. ECONOVAPACK confirms PFAS and compostability evidence only where it is included in the quotation for the selected item and route. Send the RFQ with the item, the intended claim and the destination market included, and review the evidence before artwork is frozen.

Frequently asked questions

Does PFAS-free mean the packaging contains zero fluorine? Not in practice. Most schemes define the claim through two tests: no intentionally added fluorinated chemicals, and total fluorine below 100 ppm on screening.

Can a bagasse item be PFAS-free without a test report? A formulation statement can say no fluorinated chemical was added, but a numerical threshold such as California’s 100 ppm total organic fluorine needs a laboratory report for the exact SKU. Without it, use narrower wording about the formulation instead of a threshold claim.

Does a compostable certificate prove a product is PFAS-free? No. A product can pass disintegration and biodegradation yet fail the fluorine gate of the same compostability scheme. Ask for both positions in writing.

What if my market has no PFAS rule yet? The claim is still a buyer and retailer requirement in many cases, and the evidence discipline is the same: formulation statement plus a finished-item test report. Rules are spreading, so an item documented now will not need re-proving when a new market adopts a rule.

WhatsAppEmailQuote